Aspen, AEW364-001+FCM08

SKU
AEW364-001+FCM08
Specifications
Air Handler Model AEW
Dimension 40.5Hx22Wx18.75D
Tonnage 3
Fan Motor Standard ECM
Configuration Wall Mount
Phase 1-Phase
Voltage 208/230
Metering Device Non-Bleed TXV
Brand Aspen
Series Aspen
Parts Warranty Standard 5-Year Limited Parts Warranty
Tech Guide aewtech.pdf
Repair Guide aspenrepairparts.pdf
Installation Guide aewinstallguide.pdf
Front or bottom return air position, 8 kW Electric Heat Kit. Offset hanging brackets attach to unit and wall to allow hanging inside closet. Can be AHRI matched with most brands of air conditioners or heat pumps. ETL listed for use with either R22 or R410a when a proper metering device is used. Less than 2% air leakage from cabinet when tested in accordance with ASHRAE standard 193. Unit must be installed according to installation instructions. Sturdy, fully insulated galvanized steel cabinet with knockout for duct return. Pre-programmed, 5-speed, ECM motors that ensure higher efficiency and increased energy savings by delivering constant torque during operation. Electronic circuit board provides 30 secs ON/OFF blower time delay extracting more heat/cool from the coil. High efficiency rifled copper tubes and enhanced aluminum fins provide maximum heat transfer. All coils immersion tested at 500 psi then nitrogen pressurized and factory sealed for maximum reliability.